Oxy Wash-L

Oxy Wash-L

Oxygen-Based Liquid Cleaner For Ponds

Pond Basics Oxy Wash-L is a powerful liquid formula that brings safe, oxygen-based cleaning to water gardens, water features, fountains, and more. OxyWash will quickly and effectively clean rocks, waterfalls, statues, plant pots and other water/pond feature surfaces.

LIQUID APPLICATION

Prior to use, measure pond water pH levels. If water pH is below 7.0 then adjust the level to between 7.0 and 8.0. DO NOT shut off pond pump(s) or aeration devices. Aeration must be continuous during treatment for 48 hours. Add 1 ounce for every 300 gallons of pond water every 3 days until pond surfaces are under control, then apply once a week as maintenance. Apply directly to the pond in an area with the highest circulation. Alternatively, mix Oxy Wash in a bucket with pond water and evenly spread around the pond. For best results apply Oxy Wash in the morning under sunny and calm conditions. Remove excess algae and debris from pond to reduce decaying organic matter.

Click Here For Oxy Wash Dry Formula!

PLEASE NOTE: Avoid contact with plant leaves. Product may cause short term spikes in pH levels.

ATTENTION: Failure to use OxyWash as directed or a sudden changing in water conditions not consistent with product label may result in loss or injury to aquatic life. Avoid direct contact with fish. Pond Supplies of Ohio, Inc. is not responsible for any loss of aquatic life. Always make sure there is vigorous aeration using a waterfall, bubbler, fountain, air stone or spitter. Harmful if swallowed.